Skip to content 
Original & Patented
Bone Conduction Technology
Open-Ear Safe & Healthy
Lifestyle Version
Type-C Charging
Lightweight Only 23g
IPX5 Waterproof Sweatproof
CE/ROHS/FCC/MSDS Certified
| Track system | Two-channel stereo |
| Control Mode | 2 physical function buttons |
| Active Passive | Active |
| Bluetooth Solutions | BK3296 |
| Bluetooth Version | Bluetooth®v5.2 |
| Bluetooth Protocol | A2DP v1.3, AVRCP v1.6, HFP v1.7, HID v1.1, AVCTP v1.4, AVDTP v1.3, and SPP v1.2 |
| Bluetooth Frequency | 2402~2480MHz |
| TYP | -95dBm |
| Bluetooth range | ≈10m |
| TBR | ≈10m |
| Max power | 661MW |
| Power Amplifier Type | Type AB |
| S/N | 85dB |
| Frequency Response | 20Hz-20KHz |
| Speaker Type | 15mm/8R bone conduction transducer 8 ±15%Ω |
| MIC | silicone mic – 42db |
| Battery | Li-polymer Battery 3.7V/180mAH |
| Music Time | ≈ 9 h（80% volume） |
| Talk Time | ≈10 h（80% volume） |
| Standby Time (BT connected) | 45 h |
| Standby Time (Power Off) | 300h |
| Charging Input | Type-c DC-5V |
| Charging Time | 1.5 h |
| Battery Life | 300times (80% remaining capacity) |
| IP Rating | IPX5 |
| Temperature/humidity range | The product should be in a dry and ventilated room, avoid contact with corrosive substances, and keep away from fire and heat sources. The product must be charged once a month during storage. Working temperature: 0～40℃, storage temperature: -20～60℃. Working humidity: 0%～85%, storage humidity: 0%～90% |
Unique Design
Perfect Requirement Match
Steady Quality
Value-Based Pricing
Premium Packaging
Speakers: Typically use dynamic drivers and AAC drivers.
Housing Materials: PC+ABS (Polycarbonate + Acrylonitrile Butadiene Styrene).
Ear Hooks: Commonly made of plastic or nickel alloy.
Headband/Rear Hanger: Made of nickel alloy.
PCBA (Printed Circuit Board Assembly): This is the mainboard of the headphones, consisting of the PCB (Printed Circuit Board) along with chips and electronic components.
Battery: Commonly uses lithium polymer cells. Battery protection boards include standard protection boards and Seiko protection boards.
K=A reinforced core.
The hardness ranking of carton materials is as follows: K=K > K=A > K=B > K3K > K2A > K3B.
ALOVA engineers have achieved maximum sweat resistance in our products through effective internal structural design, the use of manual/automatic glue dispensing machines, and applying a nano-coating on the PCBA (Printed Circuit Board Assembly).
It supports up to 500 recharge cycles. After 500 cycles, the battery performance may decrease, but it will not be damaged.
ALOVA is an innovative technology manufacturer focusing on bone conduction headphones, ear care products and other open ear audio products in Shenzhen, China.
Optimized by Seraphinite Accelerator